For laboratory research use only · CoA's available for every stack · Free shipping on all orders · Fat Loss · Muscle Growth · Wolverine Recovery · Longevity · Growth Hormone · Cognitive · Sleep & Recovery · Libido · Skin & Cosmetic · NZ-wide free shipping over $200 · For laboratory research use only · CoA's available for every stack · Free shipping on all orders · Fat Loss · Muscle Growth · Wolverine Recovery · Longevity · Growth Hormone · Cognitive · Sleep & Recovery · Libido · Skin & Cosmetic · NZ-wide free shipping over $200 · For laboratory research use only · CoA's available for every stack · Free shipping on all orders · Fat Loss · Muscle Growth · Wolverine Recovery · Longevity · Growth Hormone · Cognitive · Sleep & Recovery · Libido · Skin & Cosmetic · NZ-wide free shipping over $200 · For laboratory research use only · CoA's available for every stack · Free shipping on all orders · Fat Loss · Muscle Growth · Wolverine Recovery · Longevity · Growth Hormone · Cognitive · Sleep & Recovery · Libido · Skin & Cosmetic · NZ-wide free shipping over $200 ·
    Research Protocols

    How to Reconstitute Peptides: A Complete Research Guide

    15 min read·

    Research Use Only

    This content is for educational purposes related to laboratory research. It does not constitute medical advice, dosing guidance, or usage instructions.

    TL;DR

    Reconstitution is the process of dissolving lyophilised peptide powder in bacteriostatic water to create a measurable injectable solution. Add water slowly down the vial wall, never shake, refrigerate at 2-8°C, and use within 28-30 days.


    Every lyophilised (freeze-dried) peptide arrives as a white or off-white powder sealed inside a sterile glass vial. Before it can be used in any research protocol, that powder must be dissolved in bacteriostatic water to create a stable, measurable injectable solution. This process is called reconstitution.


    Getting reconstitution right matters for two reasons. First, the concentration you create determines how you calculate every dose in your protocol. Get it wrong and every measurement downstream is wrong. Second, lyophilised peptides are fragile. Incorrect handling during reconstitution - splashing, shaking, or using the wrong water - can degrade the compound and compromise your research.


    This guide covers everything a researcher needs: the equipment, the step-by-step process, the maths behind concentration and dose calculation, and a compound-by-compound reference table covering every peptide in the Research Peptide Stacks catalogue.


    What You Need Before You Start


    Every Research Peptide Stacks order includes bacteriostatic water sized to your protocol. In addition to your vials, you will need:


  1. Insulin syringes - 1ml capacity, 27-31 gauge, 8-13mm needle length. Used for both reconstitution and administration.
  2. Alcohol swabs - to sterilise the vial tops before each insertion.
  3. A clean, flat surface - ideally a non-porous countertop wiped with 70% isopropyl alcohol.
  4. Adequate lighting - you need to see the graduations on the syringe clearly.

  5. You do not need a sterile hood for subcutaneous research administration. Proper swab technique and single-use needles are the standard for research peptide handling.


    Bacteriostatic Water: Why It Matters


    Bacteriostatic water (BAC water) is sterile water containing 0.9% benzyl alcohol. The benzyl alcohol is a preservative that inhibits bacterial growth in the reconstituted solution, allowing it to remain stable for 28-30 days under refrigeration after reconstitution.


    Do not substitute bacteriostatic water with:


  6. Sterile water for injection (no preservative - degrades within hours once opened)
  7. Normal saline (may cause peptide precipitation in some compounds)
  8. Any other water source

  9. Exception - NAD+: NAD+ is acidic and can cause significant injection site discomfort with standard BAC water. For NAD+ reconstitution, use bacteriostatic water with sodium chloride (bacteriostatic saline) where available, or dilute slowly and inject particularly slowly to manage the burn. See the NAD+ entry in the reference table below.


    The Reconstitution Process - Step by Step


    Step 1: Prepare your workspace

    Wipe your surface with an alcohol swab. Lay out your peptide vial, your BAC water vial, and your syringe. Wash your hands thoroughly.


    Step 2: Swab the tops of both vials

    Use a fresh alcohol swab on the rubber stopper of your peptide vial and a separate swab on the BAC water vial. Allow both to air dry for 10 seconds. Never touch the stopper after swabbing.


    Step 3: Draw your bacteriostatic water

    Insert the needle of your syringe into the BAC water vial. Draw up the exact volume of water required for your chosen concentration. See the reference table below for the specific volume for each compound.


    Step 4: Add the water to the peptide vial - slowly

    This is the most important step. Hold the peptide vial at an angle and direct the needle so the stream of water runs down the inside wall of the glass rather than hitting the powder directly. Depress the plunger slowly. Do not spray or squirt.


    Introduce the water in small amounts, pausing between each push of the plunger if reconstituting a large volume. This keeps the water flowing gently over the powder.


    Step 5: Do not shake

    Once the water is in, do not shake the vial. Roll it gently between your palms, or swirl it slowly. You can leave it to dissolve at room temperature for 2-5 minutes. Some compounds (particularly Follistatin 344 and IGF-1 LR3) take longer to dissolve - be patient.


    Step 6: Inspect the solution

    The fully reconstituted solution should be clear and colourless, with no visible particles or cloudiness. Most peptides dissolve completely within 5 minutes. If you see persistent cloudiness after 10 minutes, do not use the solution - this may indicate degradation or contamination.


    Step 7: Store immediately

    Once reconstituted, refrigerate the vial at 2-8°C (standard fridge temperature). Keep it away from light. Do not freeze a reconstituted vial - ice crystals will destroy the peptide structure. Use within 28-30 days.


    Understanding Concentration and Dose Calculation


    The maths behind peptide dosing is simple once you understand the relationship between three variables:


    Peptide amount (in the vial, in mg or mcg) ÷ BAC water added (in ml) = Concentration (mg/ml or mcg/ml)


    Then:


    Dose required ÷ Concentration = Volume to inject (in ml)


    Most researchers use insulin syringes marked in "units" (U). On a standard U-100 insulin syringe:


  10. 1 unit = 0.01ml

  11. So a volume of 0.1ml = 10 units, 0.25ml = 25 units, and so on.


    Worked Example: BPC-157 5mg vial


    Step 1 - Reconstitute: Add 2ml of BAC water to a 5mg BPC-157 vial.


    Concentration = 5mg ÷ 2ml = 2.5mg/ml = 2,500mcg/ml


    Step 2 - Calculate dose volume:


    The research protocol calls for 250mcg daily.


    Volume = 250mcg ÷ 2,500mcg/ml = 0.1ml = 10 units


    For 500mcg: Volume = 500 ÷ 2,500 = 0.2ml = 20 units


    Worked Example: Semaglutide 5mg vial


    Step 1 - Reconstitute: Add 2ml of BAC water to a 5mg semaglutide vial.


    Concentration = 5mg ÷ 2ml = 2.5mg/ml


    Step 2 - Calculate dose volume:


  12. Week 1-4 protocol dose: 0.25mg weekly. Volume = 0.25mg ÷ 2.5mg/ml = 0.1ml = 10 units
  13. Week 5-8 dose: 0.5mg weekly. Volume = 0.5mg ÷ 2.5mg/ml = 0.2ml = 20 units
  14. Week 9-12 dose: 1mg weekly. Volume = 1mg ÷ 2.5mg/ml = 0.4ml = 40 units

  15. Two 5mg vials across a 12-week cycle covers the full protocol with minimal waste.


    Worked Example: Retatrutide 10mg vial


    Step 1 - Reconstitute: Add 2ml of BAC water to a 10mg retatrutide vial.


    Concentration = 10mg ÷ 2ml = 5mg/ml


    Step 2 - Phase 1 doses (Weeks 1-8):


  16. Weeks 1-4: 1mg weekly. Volume = 1 ÷ 5 = 0.2ml = 20 units
  17. Weeks 5-8: 2mg weekly. Volume = 2 ÷ 5 = 0.4ml = 40 units

  18. One reconstituted vial (10mg) covers Weeks 1-4 entirely (4 x 1mg = 4mg used) with remainder for early Week 5 injections. The second vial in the Phase 1 stack covers the remainder of Weeks 5-8.


    Phase 2 doses (Weeks 9-16):


  19. Weeks 9-12: 4mg weekly. Volume = 4 ÷ 5 = 0.8ml = 80 units
  20. Weeks 13-16: 8mg weekly. Volume = 8 ÷ 5 = 1.6ml = 160 units (two draws from the same vial across consecutive days is common for higher doses)

  21. Note: At the 8mg weekly dose (Phase 2, Weeks 13-16), some researchers prefer to reconstitute with 1ml of BAC water per vial (10mg/ml concentration) to reduce injection volume. At 10mg/ml: 8mg dose = 0.8ml = 80 units per injection.


    Full Compound Reference


    The following sections cover every compound in the Research Peptide Stacks catalogue. All doses are research protocol reference doses only. This information is provided for accurate research preparation. All products are for laboratory research use only.


    FAT LOSS / METABOLIC COMPOUNDS


    Retatrutide 10mg

  22. Recommended BAC water: 2ml
  23. Concentration: 5mg/ml (5,000mcg/ml)
  24. Phase 1 doses: 1mg = 20 units | 2mg = 40 units
  25. Phase 2 doses: 4mg = 80 units | 8mg = 160 units
  26. Notes: Reconstitute fresh for Phase 2. Consider 1ml BAC water (10mg/ml) for Phase 2 if large injection volumes are undesirable.

  27. MOTS-C 10mg

  28. Recommended BAC water: 2ml
  29. Concentration: 5mg/ml
  30. Research protocol dose: 5-10mg weekly (1-2 injections per week)
  31. 5mg dose = 1ml = 100 units | 10mg dose = 2ml (entire vial, one injection)
  32. Notes: MOTS-C is typically dosed once or twice weekly. At 10mg per dose, one vial = one injection.

  33. Tirzepatide 10mg

  34. Recommended BAC water: 2ml
  35. Concentration: 5mg/ml
  36. Protocol doses: 2.5mg = 50 units | 5mg = 100 units | 7.5mg = 150 units
  37. Notes: Protocol starts at 2.5mg weekly for 4 weeks, titrating to 5mg, then 7.5mg.

  38. Semaglutide 5mg

  39. Recommended BAC water: 2ml
  40. Concentration: 2.5mg/ml
  41. Protocol doses: 0.25mg = 10 units | 0.5mg = 20 units | 1mg = 40 units
  42. Notes: Two vials (10mg total) covers a full 12-week titration cycle comfortably.

  43. CagriSema - Cagrilintide + Semaglutide Combo (5mg+10mg vial)

  44. Recommended BAC water: 2ml per vial (reconstitute each separately)
  45. Concentration: Cagrilintide component 2.5mg/ml | Semaglutide component 5mg/ml
  46. Notes: Reconstitute each vial separately. Follow respective titration schedules. Both are administered once weekly on the same day.

  47. AOD-9604 5mg

  48. Recommended BAC water: 1ml
  49. Concentration: 5mg/ml (5,000mcg/ml)
  50. Research protocol dose: 500mcg daily
  51. 500mcg = 0.1ml = 10 units
  52. Notes: One 5mg vial provides 10 doses at 500mcg. Subcutaneous injection preferred.

  53. RECOVERY / WOLVERINE COMPOUNDS


    BPC-157 5mg

  54. Recommended BAC water: 2ml
  55. Concentration: 2.5mg/ml (2,500mcg/ml)
  56. Protocol doses: 250mcg = 10 units | 500mcg = 20 units
  57. Notes: One 5mg vial provides 10 days at 500mcg/day or 20 days at 250mcg/day. For localised injury research, inject subcutaneously near the target site.

  58. BPC-157 10mg

  59. Recommended BAC water: 2ml
  60. Concentration: 5mg/ml (5,000mcg/ml)
  61. Protocol doses: 250mcg = 5 units | 500mcg = 10 units
  62. Notes: The larger vial simply lasts longer - one 10mg vial provides 20 days at 500mcg or 40 days at 250mcg.

  63. TB-500 5mg

  64. Recommended BAC water: 2ml
  65. Concentration: 2.5mg/ml (2,500mcg/ml)
  66. Loading phase doses: 2-3mg twice-weekly
  67. 2mg = 0.8ml = 80 units | 3mg = 1.2ml = 120 units
  68. Maintenance dose: 2mg every 1-2 weeks = 80 units
  69. Notes: TB-500 dissolves more slowly than BPC-157. Allow 5-10 minutes of gentle swirling.

  70. TB-500 2mg (Hair and Skin Restoration Stack)

  71. Recommended BAC water: 1ml
  72. Concentration: 2mg/ml (2,000mcg/ml)
  73. Loading dose: 2mg = 1ml = 100 units (entire reconstituted vial)
  74. Notes: In the Hair and Skin Restoration Stack, each 2mg vial is a single dose.

  75. KPV 5mg (Gut Repair Stack)

  76. Recommended BAC water: 1ml
  77. Concentration: 5mg/ml (5,000mcg/ml)
  78. Protocol dose: 500mcg-1mg daily
  79. 500mcg = 0.1ml = 10 units | 1mg = 0.2ml = 20 units
  80. Notes: For gut applications, some researchers use KPV orally (drinking the reconstituted solution). Subcutaneous is used for systemic applications.

  81. GROWTH HORMONE PEPTIDES


    CJC-1295 no DAC 5mg

  82. Recommended BAC water: 2ml
  83. Concentration: 2.5mg/ml (2,500mcg/ml)
  84. Protocol dose: 100-200mcg once daily pre-sleep
  85. 100mcg = 4 units | 200mcg = 8 units | 300mcg = 12 units
  86. Notes: CJC-1295 no DAC has a short half-life (~30 minutes). Administer on an empty stomach, 30-60 minutes before sleep.

  87. Ipamorelin 5mg

  88. Recommended BAC water: 2ml
  89. Concentration: 2.5mg/ml (2,500mcg/ml)
  90. Protocol dose: 200-300mcg once daily with CJC-1295 no DAC
  91. 200mcg = 8 units | 300mcg = 12 units
  92. Notes: Can be combined in the same syringe as CJC-1295 no DAC for a single injection. 5 days on, 2 days off schedule recommended.

  93. Ipamorelin 10mg

  94. Recommended BAC water: 2ml
  95. Concentration: 5mg/ml (5,000mcg/ml)
  96. Protocol dose: 200-300mcg daily
  97. 200mcg = 4 units | 300mcg = 6 units
  98. Notes: Some researchers prefer 4ml BAC water (2.5mg/ml) to make measurements easier.

  99. CJC-1295 no DAC + Ipamorelin Combo Vial (5mg + 5mg)

  100. Recommended BAC water: 2ml
  101. Concentration: 2.5mg/ml each compound (5mg/ml total blend)
  102. Protocol dose: 100-200mcg of each compound once daily
  103. 100mcg each = 4 units | 200mcg each = 8 units | 300mcg each = 12 units
  104. Notes: The blend vial eliminates the need to draw from two separate vials. Draw once, inject once.

  105. GHRP-2 5mg

  106. Recommended BAC water: 2ml
  107. Concentration: 2.5mg/ml (2,500mcg/ml)
  108. Protocol dose: 100-200mcg once daily at bedtime
  109. 100mcg = 4 units | 200mcg = 8 units
  110. Notes: Must be administered on a completely empty stomach (minimum 2 hours post-meal). GHRP-2 stimulates hunger within 20-30 minutes of injection via ghrelin receptor activation.

  111. IGF-1 LR3 1mg

  112. Recommended BAC water: 1ml
  113. Concentration: 1mg/ml (1,000mcg/ml)
  114. Protocol dose: 20-50mcg once daily post-workout
  115. 20mcg = 2 units | 50mcg = 5 units
  116. Notes: Use a 0.5ml syringe for precision. CRITICAL: Never inject IGF-1 LR3 fasted. Always inject within 30-60 minutes of a meal containing carbohydrates.

  117. Tesamorelin 5mg

  118. Recommended BAC water: 1ml
  119. Concentration: 5mg/ml (5,000mcg/ml)
  120. Protocol dose: 1-2mg daily
  121. 1mg = 0.2ml = 20 units | 2mg = 0.4ml = 40 units
  122. Notes: Begin at 1mg/day for 2 weeks, then escalate to 2mg/day. Subcutaneous injection into abdominal tissue.

  123. Sermorelin 5mg

  124. Recommended BAC water: 2ml
  125. Concentration: 2.5mg/ml (2,500mcg/ml)
  126. Protocol dose: 200-300mcg once daily at bedtime
  127. 200mcg = 8 units | 300mcg = 12 units
  128. Notes: Administer subcutaneously 30 minutes before sleep on an empty stomach.

  129. LONGEVITY / ANTI-AGING COMPOUNDS


    Epithalon (Epitalon) 10mg

  130. Recommended BAC water: 2ml
  131. Concentration: 5mg/ml (5,000mcg/ml)
  132. Protocol dose: 10mg daily for 10 consecutive days (Russian Protocol)
  133. 10mg = 2ml = 200 units (entire reconstituted vial)
  134. Notes: Reconstitute one vial per day for each of the 10 injection days. Courses are run twice yearly with a minimum 4-month gap between courses.

  135. NAD+ 500mg

  136. Recommended BAC water: 5ml
  137. Concentration: 100mg/ml
  138. SubQ protocol dose: 50-100mg per injection, 3x weekly
  139. 50mg = 0.5ml = 50 units | 100mg = 1ml = 100 units
  140. Notes: NAD+ is acidic and may cause injection site burning, brief nausea, or headache. Inject slowly over 30-60 seconds. Rotate injection sites. The 500mg vial at 5ml provides 5 x 100mg doses or 10 x 50mg doses.

  141. NAD+ 100mg

  142. Recommended BAC water: 1ml
  143. Concentration: 100mg/ml
  144. SubQ protocol dose: 50-100mg per injection, 3x weekly
  145. 50mg = 0.5ml = 50 units | 100mg = 1ml = 100 units (entire vial)
  146. Notes: The 100mg vial is the correct format for SubQ protocols. One vial = one 100mg injection or two 50mg injections.

  147. GHK-Cu (Copper Peptide) 50mg

  148. Recommended BAC water: 1ml
  149. Concentration: 50mg/ml (50,000mcg/ml)
  150. SubQ protocol dose: 2-5mg daily
  151. 2mg = 0.04ml = 4 units | 5mg = 0.1ml = 10 units
  152. Notes: For easier measurement, reconstitute with 2ml (25mg/ml): at this concentration, 2mg = 8 units, 5mg = 20 units. GHK-Cu can also be used topically.

  153. GHK-Cu (Copper Peptide) 100mg

  154. Recommended BAC water: 2ml
  155. Concentration: 50mg/ml (50,000mcg/ml)
  156. Protocol dose: 2-5mg daily SubQ
  157. 2mg = 4 units | 5mg = 10 units
  158. Notes: Same concentration as the 50mg vial with 1ml BAC water - the 100mg vial simply lasts longer.

  159. Thymalin 10mg

  160. Recommended BAC water: 1ml
  161. Concentration: 10mg/ml
  162. Protocol dose: 10mg daily for 10 consecutive days (Khavinson Protocol)
  163. 10mg = 1ml = 100 units (entire vial per dose)
  164. Notes: Like Epithalon, Thymalin follows a 10-day consecutive course protocol, run twice yearly. One vial = one day's dose.

  165. Thymosin Alpha-1 5mg

  166. Recommended BAC water: 1ml
  167. Concentration: 5mg/ml (5,000mcg/ml)
  168. Protocol dose: 1.6mg subcutaneously, 1-2x weekly
  169. 1.6mg = 0.32ml = 32 units
  170. Notes: 1.6mg is the clinical standard dose derived from the licensed Zadaxin product. One 5mg vial provides 3 full doses at 1.6mg.

  171. COGNITIVE / NOOTROPIC COMPOUNDS


    Selank 10mg

  172. Recommended BAC water: 2ml
  173. Concentration: 5mg/ml (5,000mcg/ml)
  174. Protocol dose: 250-500mcg daily (SubQ or intranasal)
  175. 250mcg = 5 units | 500mcg = 10 units
  176. Notes: For intranasal use, transfer the reconstituted solution to a nasal spray bottle. Standard nasal pump delivers approximately 100mcg per spray at this concentration.

  177. Semax 5mg

  178. Recommended BAC water: 1ml
  179. Concentration: 5mg/ml (5,000mcg/ml)
  180. Protocol dose: 300-600mcg daily (SubQ or intranasal)
  181. 300mcg = 6 units | 600mcg = 12 units
  182. Notes: Same administration approach as Selank. SubQ gives more consistent absorption than intranasal for systemic research.

  183. SS-31 (Elamipretide) 10mg

  184. Recommended BAC water: 2ml
  185. Concentration: 5mg/ml (5,000mcg/ml)
  186. Protocol dose: 0.25-1mg daily SubQ
  187. 0.25mg = 5 units | 0.5mg = 10 units | 1mg = 20 units
  188. Notes: SS-31 is a mitochondria-targeted peptide. One 10mg vial at 5mg/ml provides 10-40 days of protocol depending on dose.

  189. SLEEP PEPTIDES


    DSIP (Delta Sleep-Inducing Peptide) 5mg

  190. Recommended BAC water: 2ml
  191. Concentration: 2.5mg/ml (2,500mcg/ml)
  192. Protocol dose: 200-400mcg SubQ, 30-60 minutes before sleep
  193. 200mcg = 8 units | 400mcg = 16 units
  194. Notes: Dose 2-3 nights per week maximum (non-consecutive). Daily DSIP administration habituates the sleep pathway. One 5mg vial provides 12-25 doses depending on dose level.

  195. LIBIDO / REPRODUCTIVE COMPOUNDS


    PT-141 (Bremelanotide) 10mg

  196. Recommended BAC water: 2ml
  197. Concentration: 5mg/ml (5,000mcg/ml)
  198. Protocol dose: 1-1.75mg SubQ, 30-45 minutes before activity, as needed
  199. 1mg = 20 units | 1.75mg = 35 units
  200. Notes: PT-141 is an as-needed compound, not a daily protocol. Maximum 1 dose per 24 hours. Maximum 8 doses per month. Never combine with PT-141 - overlapping melanocortin receptor activity significantly increases adverse effects.

  201. Kisspeptin-10 5mg

  202. Recommended BAC water: 1ml
  203. Concentration: 5mg/ml (5,000mcg/ml)
  204. Protocol dose: 100-200mcg SubQ, 1-2x weekly
  205. 100mcg = 2 units | 200mcg = 4 units
  206. Notes: Pulsatile dosing is essential - continuous administration suppresses GnRH via receptor desensitisation. Once or twice-weekly dosing preserves receptor sensitivity.

  207. Kisspeptin-10 10mg

  208. Recommended BAC water: 2ml
  209. Concentration: 5mg/ml (5,000mcg/ml)
  210. Protocol dose: Same as 5mg vial above
  211. Notes: Larger format for longer protocols. Used in the PCT/Hormonal Reset Stack.

  212. Gonadorelin 2mg

  213. Recommended BAC water: 1ml
  214. Concentration: 2mg/ml (2,000mcg/ml)
  215. Protocol dose: 100mcg SubQ, 2-3x weekly
  216. 100mcg = 0.05ml = 5 units
  217. Notes: The draw volume is very small at standard concentration. One 2mg vial provides approximately 20 doses at 100mcg.

  218. HCG 5000IU

  219. Recommended BAC water: 1ml
  220. Concentration: 5,000IU/ml
  221. Protocol dose: 1,000-2,000IU SubQ, 2-3x weekly
  222. 1,000IU = 0.2ml = 20 units | 2,000IU = 0.4ml = 40 units
  223. Notes: HCG is dosed in IU (International Units), not mg. One vial provides 2-5 injections at research protocol doses.

  224. SKIN / COSMETIC COMPOUNDS


    Melanotan II 10mg

  225. Recommended BAC water: 2ml
  226. Concentration: 5mg/ml (5,000mcg/ml)
  227. Protocol dose: Start at 0.25mg daily, titrate to 0.5-1mg
  228. 0.25mg = 5 units | 0.5mg = 10 units | 1mg = 20 units
  229. MANDATORY: Begin at 0.25mg - do not start above this dose.
  230. Notes: UV exposure is required for pigmentation activation. Nausea and facial flushing are common at initiation. Never combine with PT-141.

  231. Follistatin 344 1mg

  232. Recommended BAC water: 0.5ml (500mcl)
  233. Concentration: 2mg/ml (2,000mcg/ml)
  234. Protocol dose: 50-100mcg daily
  235. 50mcg = 0.025ml = 2.5 units | 100mcg = 0.05ml = 5 units
  236. Notes: Follistatin 344 has the smallest draw volumes in the catalogue. Use a 0.5ml syringe graduated in 0.01ml increments. Dissolves slowly - allow 10 minutes of gentle swirling.

  237. Frequently Asked Questions


    Can I combine two peptides in the same syringe?

    Yes, for compounds with compatible protocols. The most common combination is CJC-1295 no DAC + Ipamorelin - draw CJC-1295 first, then Ipamorelin into the same syringe. BPC-157 and TB-500 can also be combined. Do not combine GLP-1 compounds with other peptides, and do not combine Melanotan II with PT-141 under any circumstances.


    My peptide isn't dissolving - what do I do?

    Some compounds (particularly Follistatin 344, IGF-1 LR3, and TB-500) take longer to dissolve. Swirl gently for up to 15 minutes. Do not shake and do not apply heat. If the solution is still cloudy after 15 minutes, check that you used bacteriostatic water and that the vial has been stored correctly prior to reconstitution.


    How long does reconstituted peptide last?

    28-30 days refrigerated (2-8°C) in most cases. Label each vial with the reconstitution date.


    Can I freeze a reconstituted vial?

    No. Freezing a reconstituted vial causes ice crystal formation that destroys peptide bonds and renders the compound inactive. Only lyophilised (unreconstituted, powder) vials should be frozen for long-term storage.


    What if I add too much or too little water?

    The concentration changes, which changes every dose calculation. Recalculate your dose volume using the actual volume added. Example: if you meant to add 2ml but added 2.5ml to a 5mg BPC-157 vial, your concentration is 5 ÷ 2.5 = 2mg/ml instead of 2.5mg/ml. For a 250mcg dose: 250mcg ÷ 2,000mcg/ml = 0.125ml = 12.5 units.


    Can I use a different bacteriostatic water volume to get a different concentration?

    Yes - the volumes in this guide are recommendations, not requirements. Researchers often adjust BAC water volume to get round-number dose volumes on the syringe. The key constraint is that you use enough water to fully dissolve the peptide (typically at least 0.5ml per 5mg of peptide) and that you recalculate your dose volume accurately.


    Quick Reference Summary Table


    See the table below for a consolidated reference of all compounds.


    Quick Reference Summary Table

    CompoundVial SizeBAC WaterConcentrationCommon DoseDraw Volume
    Retatrutide10mg2ml5mg/ml1mg / 2mg / 4mg / 8mg20 / 40 / 80 / 160 units
    MOTS-C10mg2ml5mg/ml5-10mg100-200 units
    Tirzepatide10mg2ml5mg/ml2.5-7.5mg50-150 units
    Semaglutide5mg2ml2.5mg/ml0.25-1mg10-40 units
    AOD-96045mg1ml5mg/ml500mcg10 units
    BPC-1575mg2ml2.5mg/ml250-500mcg10-20 units
    BPC-15710mg2ml5mg/ml250-500mcg5-10 units
    TB-5005mg2ml2.5mg/ml2-3mg80-120 units
    TB-5002mg1ml2mg/ml2mg100 units
    KPV5mg1ml5mg/ml500mcg-1mg10-20 units
    CJC-1295 no DAC5mg2ml2.5mg/ml100-200mcg4-8 units
    Ipamorelin5mg2ml2.5mg/ml200-300mcg8-12 units
    Ipamorelin10mg2ml5mg/ml200-300mcg4-6 units
    CJC+Ipa Combo5mg+5mg2ml2.5mg/ml each200mcg each8 units
    GHRP-25mg2ml2.5mg/ml100-200mcg4-8 units
    IGF-1 LR31mg1ml1mg/ml20-50mcg2-5 units
    Tesamorelin5mg1ml5mg/ml1-2mg20-40 units
    Sermorelin5mg2ml2.5mg/ml200-300mcg8-12 units
    Epithalon10mg2ml5mg/ml10mg200 units (whole vial)
    NAD+500mg5ml100mg/ml50-100mg50-100 units
    NAD+100mg1ml100mg/ml50-100mg50-100 units
    GHK-Cu50mg1ml50mg/ml2-5mg4-10 units
    GHK-Cu100mg2ml50mg/ml2-5mg4-10 units
    Thymalin10mg1ml10mg/ml10mg100 units (whole vial)
    Thymosin Alpha-15mg1ml5mg/ml1.6mg32 units
    Selank10mg2ml5mg/ml250-500mcg5-10 units
    Semax5mg1ml5mg/ml300-600mcg6-12 units
    SS-3110mg2ml5mg/ml0.25-1mg5-20 units
    DSIP5mg2ml2.5mg/ml200-400mcg8-16 units
    PT-14110mg2ml5mg/ml1-1.75mg20-35 units
    Kisspeptin-105mg1ml5mg/ml100-200mcg2-4 units
    Gonadorelin2mg1ml2mg/ml100mcg5 units
    HCG5000IU1ml5000IU/ml1,000-2,000IU20-40 units
    Melanotan II10mg2ml5mg/ml0.25-1mg5-20 units
    Follistatin 3441mg0.5ml2mg/ml50-100mcg2.5-5 units

    All protocols described in this article are for laboratory research use only. Research Peptide Stacks products are not intended for human or animal consumption.

    Disclaimer

    The information provided is for laboratory research education only. Products sold by Research Peptide Stacks are intended for research use only and are not for human or animal consumption.